Do You Need Council Approval in Woorabinda?

Woorabinda is an Aboriginal community in central Queensland, west of Rockhampton. Its local government area is unusual in shape — a central township together with four pastoral land areas, around 42,500 hectares in all. The land is held in trust for the community rather than owned as ordinary freehold, and that changes where approvals begin. Before the familiar "do I need a development application" question comes a prior one: who holds the land, and what interest can you get in it.

The short answer

Usually yes, but tenure comes first. Woorabinda is Deed of Grant in Trust (DOGIT) land, held by Woorabinda Aboriginal Shire Council as trustee. Before a development application, you normally need a lease or permission from the Council as trustee. Development assessment under the Planning Act 2016 is a separate, later step.

Figure 1: On trust land the tenure gate comes before the planning gate. Clearing one does not clear the other.

What the land tenure is

The Woorabinda local government area is Deed of Grant in Trust land — granted by the State in fee simple in trust, and held by Woorabinda Aboriginal Shire Council as trustee for the community. It covers a central township and four pastoral areas, and it is not private freehold that is bought and sold like a suburban block.

That means the Council has two roles at once: it is the trustee of the land, and it is the local government. So the order of operations starts with tenure. To build or use a parcel, you first need a lawful interest in it, and on DOGIT land that is usually a trustee lease granted by the Council under the Aboriginal Land Act 1991 (Qld) and the Land Act 1994 (Qld). You apply to the Council in its trustee capacity, it decides whether to grant a lease for the use, term and conditions, native title is addressed as part of that process under the Native Title Act 1993 (Cth), and the lease is registered with the State land registry. Only then do you hold something to build on.

Does a planning scheme apply?

Yes. Woorabinda has adopted its own local planning scheme, gazetted in August 2014. So once tenure is settled, the planning side works like anywhere in Queensland: the scheme sets zones and codes and tells you whether a use or building is accepted, code assessable or impact assessable. Accepted versus assessable development explains those categories, and the split between township and pastoral land matters here — the two are treated very differently.

The trustee lease and the planning approval are two different decisions, even though the same Council is often on both sides. It acts as trustee under the land legislation, and separately as the local government assessment manager under the Planning Act 2016. One practical link: the Planning Act treats a lease of more than 10 years that divides a lot as reconfiguring a lot, which is itself assessable.

What still works the same way

Beneath the tenure layer, the ordinary framework applies. A new or intensified use is a material change of use and may need a development application, lodged on the standard DA Form 1. Building work is handled separately again under the Building Act 1975, usually by a private building certifier — a different approval from the planning one. Where the project is small domestic work that is accepted development under the scheme, no development application is needed — but building approval from a private certifier under the Building Act 1975 may still apply. Accepted development does not mean unregulated; it means the project meets all of the planning scheme standards without needing a DA. Keep records of how it meets those standards in case the question arises. Building approval versus development approval sets out that distinction. In a remote community, getting a private building certifier is a practical constraint in its own right. There may be only one or two certifiers who regularly work in the region, and travel costs can add materially to the project. It is worth identifying a certifier early — before you finalise a design — to confirm they are available and to understand their fee structure for the location. Finding a building certifier in QLD and building approval versus development approval set out the general process.

Where to start

Start with Woorabinda Aboriginal Shire Council, and be clear which role you are asking it to play. If your question is about getting an interest in the land, that is the trustee. If it is about whether a use will be approved, that is the assessment manager. For most projects the trustee conversation comes first. Where the State has a role — a state-controlled road or other State interest — the State Assessment and Referral Agency (SARA) is the referral point.

Because the first gate here is tenure rather than a planning lookup, an instantDA planning report is not the starting point for a Woorabinda project — the Council as trustee is The practical sequence is: (1) approach the Council in its trustee capacity with a proposal that identifies the parcel, the proposed use, and the term; (2) the Council as trustee decides whether to grant a lease under the Land Act 1994 and the Aboriginal Land Act 1991, including any native title procedures required under the Native Title Act 1993 (Cth); (3) if granted, the lease is registered with the State land registry and you hold a registrable interest; (4) with that interest in hand, approach the same Council in its separate capacity as assessment manager to determine whether a development application is needed under the planning scheme. . A report can help later, if a development application is needed and you want the zone, codes and constraints in one place, but it does not grant or replace the interest in the land that has to come first.